Title: The End Of Clown Posse Source:
http://home.comcast.net/~the_posse/index.html URL Source:http://home.comcast.net/~the_posse/index.html Published:Jul 12, 2006 Author:me Post Date:2006-07-12 18:29:11 by continental op Keywords:None Views:78609 Comments:88
Clown Posse Announcements
We are currently closed, thanks to the paragons of FRee speech.
Watch this page for info and updates.
Members may contact us at griftertips at hotmail dot com.
Personally, I like the 6.2/6.5L Detroit Diesels. You can find them in many 82 up Chevy Pickups.
I like them because they are cheap and the naturally aspirated 6.2 has excellent fuel economy. They can be ALLOT of work, however and you have to enjoy this sort of thing or it quickly becomes frustrating and tedious. The 6.2's don't make allot of power compared to other diesels, but they're cheap, good for 300,000 miles and I just have an affinity for them.
The turbocharged 6.5's make more power and are prefered by most. Probably easier to locate nowdays also. (I had to go to Tennessee to find a low mileage 6.2. Whereas 6.5's are everywhere.) The 7.3L ford was a good engine, as well as any Cummins, but then the price creeps up..
I'm also partial to the 1/2 ton and I need a decent sized truck to push snow and drag things around the shop here... but, if you're just wanting to experiment with Veggie Oil or Bio-Diesel and you don't have a perfered vehicle, the VW Rabbit was a good running diesel and they're cheap. The Isuzu may be a good alternative also.
Running VO, as it's been explained to me by people who do, (never tried it myself) is a simple matter of cutting the oil with kerosine or diesel to reduce the viscosity to an acceptable level. As I understand it, Bio-diesel is a cooking process which usually involved recycling used oil (typically from restaurants and such) and is very cost effective if done in volume.
Again, I've never tried it myself, but the locals cook it up here in a half water heater tank with one element installed.. I see them collecting fryer oil from the restrauant across the street all the time and I've always meant to stop by and see exactly what is involved with cooking a batch, but haven't had the time.
I'm really just a fan as opposed to a diesel guru. I always hated diesels till I a pal of mine came by with a bad transmission, no money and a junk 82 Scottsdale 2wd diesel pickup to trade for the labor.
I thought it was cool, so it's become a frame off resto project. Set it on a 4x4 shortbed chassis, gave it a one ton transfer case and built a performance 4L60 transmission for it. (Got a better 1'st gear ratio than the 4L80 used in many of the later models) I'll be putting the driveline in it within the next two weeks or so and welding up the rot under the cab.
IMO, Diesels are a PITA compared to a gas engine, but if you have the time and inclination, it's a neat hobby.
And you should try a diesel pickup. I guarantee you spend an afternoon with a Cummins turbo, and you won't want anything else. I love them, but.. sadly, I'm just too fucking cheap to spend that kind of money. Can't do it, my hand simply refuses to write a check that big.
Here's my junker in it's current state of decay..
I know it looks kind of rough.. but I think most of that will buff right out and I've found that fenders are over rated and just too heavy to be taken seriously.
I know it looks kind of rough.. but I think most of that will buff right out and I've found that fenders are over rated and just too heavy to be taken seriously.
A little chickenwire and paper maché and nobody'll notice the difference. Heck, I used to see vehicles like that on the Ohio turnpike all the time... Of course, that was maybe 20~25 years ago.
I agree that fenders are over-rated, on the highway. But on my "roads," you need all the weight and accesories you can cram onto a pickup. On Ozark country roads, I wouldn't be caught dead with anything less than my 3/ 4 ton Ford. Every I know who has got the bucks is switching to diesel right now. Guess I'll have to bite the bullet and get one sooner or later. Can put it down under "business expenses."
"Be a patriot and a hero. Torture and kill a cop, before they do it to you---because they will." Michael E. Kreca
A little chickenwire and paper maché and nobody'll notice the difference.
Best thing about these is they're so cheap to fix right in the first place, there's really no need.
Got both rockers, cab corners and a weld in cab mount, delivered, today for $50.23
I'm going to patch some old doors I picked up, but the rest of it (fenders and probably the bed) is so cheap to buy new, I just can't imagine going to allot of effort for it.
The tormented screams of pinched pennies echo around these parts..
You can download these and watch them on your computer or buy a DVD player that plays divx files. You can get one at walmart for fourty bucks. Or at compusa or target.